ARB 3450130 - Manual (Page 5)

Last Rev Date: 19/04/06 Page 5 of 22 Fitting instructions# 3783216
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
3. To remove bumper bar where
the inner guard is attached, push
plastic pin inward , then pull out
plastic retainer clip. Remove fog
lights and fog light adjuster and
the black plastic grommets from
bumper.
4. To remove headlights from
vehicle for ease of joining indicator
looms and extending fog light
looms, firstly lift plastic cover from
above headlight and undo one
plastic retaining clip and three
6mm bolts, then remove headlights.
5. After removing headlights from
vehicle, remove some of the blue
insulating tape from vehicle
indicator and parking looms to
expose wiring to be able to fit
connectors.