ARB 3915030 - Manual (Page 14)

Last Rev Date: 29/10/2008 Page 14 of 24 Fitting instructions# 3783321
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
FITTING PROCEDURE BULL BAR PREPARATION
FITTING LIGHT SURROUND ASSEMBLY
Follow fitting instructions supplied with kit.
47. Prior to fitting the supplied indicators, with
lenses temporarily removed, replace 21W
indicator light bulbs (amber reflector side)
with 10W bulbs supplied in fitting kit.
48. If fitting fog lamps, refer to instructions
supplied with kit.
49. Fit the surrounds into the openings in the
wings referring to the fitting instructions with
surround kit.