Apple Final Cut Express HD - Manual (Page 383)

Chapter 27 Arranging Clips in the Timeline 383
VI
To copy (or cut) and paste clip items from one Timeline track to another:
1 Select one or more clip items in the Timeline.
2 Do one of the following, depending on what you want:
 Copy the clip items by pressing Command-C.
 Cut the clip items by pressing Command-X.
3 Option-click the Auto Select control for the track you want to paste clip items into. (If
no Auto Select Controls are enabled, Option-click twice.)
4 Position the playhead where you want the paste to occur.
5 Paste the clip items by pressing Command-V.
The copied clip items are pasted to the tracks with Auto Select enabled, except where
no Auto Select change was made. Where no Auto Select change was made after
copying, the clip items are pasted to the original tracks. See the picture below for an
example of these results.
∏
Tip: Because you can’t Option-click a pair of audio tracks at once, Option-click the
lowest-numbered audio track you want to paste into.
The V2 Auto Select
control is enabled
after copying a clip item.
No audio Auto Select
controls are changed
after copying a clip item.
The video clip item is
pasted to the track with
Auto Select enabled.
The audio clip items are
pasted to the original
tracks.