Lukas SC 350 E - Manual (Page 16)

16
It is strictly prohibited to reach into the path of the rescue
device (e.g. between the blades or spreader arms or
between the rescue ram and the material to be processed)!
WARNING / CAUTION!
The particular effect of the force of the rescue equipment during operation could
cause pieces of the vehicle to break off or fl y off, posing a danger to persons.
Those not involved in the rescue operation should therefore keep at a distance
appropriate to the situation. Any trapped or enclosed persons must be protected.
Wear the following when working with the rescue tool:
- protective
clothing,
- safety helmet with visor or protective goggles,
- protective
gloves
- and, if necessary, ear protection
Before operating the rescue tool, you should ensure that its movements or fl ying fragments
will not put participants or bystanders at risk! Further avoid unnecessary damage to property
belonging to others, objects not involved by the rescue equipment / fl ying fragments.
6.2 Cutting (cutter and combi tool)
The blades should be positioned at a 90° angle to the object to be cut, if possible.
RIGHT
WRONG
12
9
3
15° 15°
90°