Lukas SC 350 E - Manual (Page 22)

22
Inspections to be carried out:
Visual inspection
Cutter and combi tool
• Opening width of the blade arms on the tips (see chapter "Technical data"),
• General tightness (leaks),
• Ease of movement of star handle,
• Existence and stability of handle,
• Labels completely existent and legibly,
• Covers in perfect condition,
• Check the tightening torque of the pivot bolt (tightening torque M
A
see "Technical data").
• Blade arms free of cracks and cutting surfaces without nicks or deformations,
• Cutting surfaces go on top of each other without making contact,
• The sliding plates, bolts and retaining rings of the blade arms are in place and in good
condition,
• Illumination of main switch, work area and connection slot fully functional.
Spreader
• Opening width of arms at the tips (see chapter on "Technical Data"),
• General tightness (leaks),
• Ease of movement of star handle,
• Existence and stability of handle,
• Labels completely existent and legibly,
• Covers in perfect condition,
• Spreader arms not cracked,
• Bolts and retaining rings of spreader arms in place and in good condition,
• The corrugations on the tips should be clean and square, without cracks
• The tips must be in place and locked
• Illumination of main switch, work area and connection slot fully functional.
Rescue ram
• Piston can be extended to its full length (see chapter on "Technical Data"),
• Cylinder and piston rod undamaged and not deformed,
• Claws correctly and securely fi tted,
• Claws can be turned and are undamaged (no break-outs),
• General tightness (leaks),
• Ease of movement of star handle,
• Labels completely existent and legibly,
• Illumination of main switch, work area and connection slot fully functional.
8.1 Overview of eDRAULIC devices