Lukas SC 350 E - Manual (Page 6)

6
In the event of malfunctions,
shut down the device
immediately and make it safe.
Repair the fault immediately. Do not carry out any changes
(additions or conversions)
to the equipment without
obtaining the approval of
LUKAS beforehand.
Observe all safety and danger
information on the device and
in the operating instructions. All safety and danger
information on the device
must always be complete and
in a legible condition.
Any mode of operation which
compromises the safety and/
or stability of the device is
forbidden! Repairs to the device may
only be carried out by trained
service technicians with
specifi c knowledge of the
device.
Safety equipment must never
be disabled! Use only original LUKAS
accessories and spare parts
when carrying out repairs.
Make sure before switching
on/starting up the device and
during its operation, that this
will put no one in danger. Observe all intervals
for recurring tests and/
or inspections that are
prescribed or stated in the
operating instructions.
When working in the vicinity
of live components and
cables, appropriate measures
must be taken to avoid a
transfer of current or high-
voltage arcing to the device. Please note that material
could fall down or suddenly
break free during spreading,
cutting, squeezing and
squashing operations as a
result of shearing, tearing
or breaking; appropriate
countermeasures must
Please ensure that you do not
become entangled in cables
and trip when working with or
transporting the device. Please ensure that the
battery contacts are not short-
circuited.
The build-up of static charge
and therefore possible
sparking must be avoided
when handling the device. Only touch any broken-off
parts or the cut-off parts
wearing protective gloves,
since the torn / cut edges can
be very sharp.