Lukas SC 350 E - Manual (Page 27)

27
9.3.2 Changing the blades, protective cover and handle on the S311E cutter
and on the SC350E and SC250E combi tools
Components to be
replaced Required work
steps
Protective cover 1. - 9. and 10.
Pivot bolt 1., 5. and 10.
Handle 1. - 3. and 10.
Blade 1. - 7. and 10.
Work steps:
1. First of all, carefully clean the rescue equipment.
2. Next, close the blade arms so that the tips are almost touching.
NOTE:
The blade bolts are only accessible when the blade arms are almost touching
Further procedure:
3. Remove screws "A" from handle "B".
The handle can then be removed.
A
B
NOTE:
The illustrations show the equipment with the blade arms of the cutter. Assembly
and disassembly are identical for the combi tool!
E
F
F
4. Push the hand guard E in the
depicted direction until the safety
bolts F are easily accessible.