Lukas SC 350 E - Manual (Page 24)

24
9.2 Preventive maintenance
9.2.1 Care instructions
From time to time, the outside of the device should be cleaned with a damp cloth (not the
electrical contacts in the connection slot, the battery or on the power supply) and oil
should be applied to the metallic surfaces (not the electrical contacts in the connection
slot, on the battery or on the power supply) to prevent corrosion.
(In case of doubt, contact your authorised LUKAS dealer or LUKAS directly!)
9.2.2 Functional and stress test
If there is any doubt regarding the safety or reliability of the equipment, a function and stress
test must also be performed.
LUKAS offers appropriate testing equipment for this.
ATTENTION!
When cleaning the equipment, take care not to use any cleaning agent with a pH
value outside the range 5 - 8!
9.3.1 Blades, protective cover and handle replacement for the S700E cutter
9.3 Repairs
Components to be
replaced Required work
steps
Protective cover 1., 2. and 7.
Pivot bolt 1. - 4. and 7.
Handle 1. - 5. and 7.
Blade 1. - 6. and 7.