3 power supply, 4 extension for rescue ram – Lukas SC 350 E User Manual
Page 46
46
13.3 Power supply
The eDRAULIC devices have a unique power supply with integrated electronics, allowing
the devices to be operated for an almost unlimited time by connecting them to an external
power source. The power supply converts the voltage of the external power source in such
a way that it may be used instead of a battery.
Structure:
There is an adapter on one side of the power supply which can be simply inserted into
the connection slot of the devices and locked. The other side has a mains plug. Both are
connected by a cable. The mains plug is a Schuko plug with Protection Classifi cation IP68.
The integrated fi lter is appropriate for the conversion of AC voltage to DC voltage.
Adapter
Schuko plug
Cable
Filter
Cable
NOTE:
Pay strict attention to the separate operating instructions for the power supply.
13.4 Extension for rescue ram
A special extension is available for the eDRAULIC rescue ram, which may be used to enlarge
the effectively possible opening width of an object.
The installation instructions for the extension may be taken from the chapter on "Squeezing
(rescue ram)".
Type
Extension
Ref.no.
174081000
Dimensions including claw
l x w x h
[mm]
360 x 55 x 55
[in.]
14.17 x 2.17 x 2.17
Maximum extension
possible
[mm]
300
[in.]
11.81
Weight
[kg]
4,2
[lbs.]
9.3