Lukas SC 350 E - Manual (Page 19)

19
A The connection pieces for the LUKAS
chain sets are attached to the boreholes
A on the blades using load bolts.
(see fi gure on the right).
Chain sets:
for SC250E: KSV 8/50
for SC350E: KSV 8/50
for SP300E: KSV 11
NOTE:
Take note also of all the instructions and regulations in the separately supplied
operating instructions for the chain sets.
Squeezing may only take place near the tips (see fi gure below).
Squeezing area
6.5 Squeezing (spreader, combi tools)
WARNING / CAUTION / ATTENTION!
The light metal alloy arms must not be damaged.
Squeezing area