Lukas P 600 OE - Manual (Page 12)

12
CAUTION!
When connecting the hose assemblies / units, always ensure that the connection
components are not soiled. If necessary, clean immediately!
WARNING / CAUTION / ATTENTION!
Before connecting equipment, make sure that all the components
used are suitable for the maximum operating pressure of the
hydraulic unit! In cases of doubt, you must consult LUKAS
directly before connecting the equipment!
Male coupling Female coupling
Dust protection caps
The hose lines / units are connected via quick-disconnect coupling halves (female and male)
to the hydraulic pump in such a way that they cannot be reversed.
Remove the dust caps before coupling together. Then push the male and female parts
together and turn the locking sleeve on the female coupling in the direction "1" until the
locking sleeve clicks in place. The connection has now been made and locked. Uncoupling
is accomplished by turning the locking sleeve in direction "0".
5. Connecting the hoses / devices
0
1
0