Lukas P 600 OE - Manual (Page 6)

6
In the event of malfunctions,
shut down the device
immediately and make it safe.
Repair the fault immediately. Do not carry out any changes
(additions or conversions)
to the equipment without
obtaining the approval of
LUKAS beforehand.
Observe all safety and danger
information on the device and
in the operating instructions. All safety and danger
information on the device must
always be complete and in a
legible condition.
Make sure that all safety
covers are present on the
device and in proper working
condition. Any mode of operation which
compromises the safety and/
or stability of the device is
forbidden!
Safety equipment must never
be disabled! The maximum permissible
operating pressure must not
be changed.
Make sure before switching
on/starting up the device and
during its operation, that this
will put no one in danger. Observe all intervals for
recurring tests and/or
inspections that are prescribed
or stated in the operating
instructions.
When working in the vicinity of
live components and cables,
appropriate measures must
be taken to avoid a transfer of
current or high-voltage arcing
to the device. Use only original LUKAS
accessories and replacement
parts when carrying out
repairs.
When working with this
equipment or when
transporting it, ensure that you
do not get caught up in the
hose or cable loops and trip.
The build-up of static charge
and therefore possible
sparking must be avoided
when handling the device. All damaged electrical
components e.g. scorched
cables, etc. are to be replaced
immediately!