Operator panel and display – IKA HBC 10 baisc User Manual

Page 28

Advertising
background image

28

• Cooling coil

When the set temperature is close to the ambient tem-
perature, the cooling coil should be used for counter-
cooling due to the self-heating.
Connect the water supply and return line hoses to the
cooling coil connectors (see Fig. 4).

For bath temperatures > 95 °C do not use the cooling coil
with water.
For bath temperatures > 60 °C make sure that the flow
rate through the cooling coil is high enough, to avoid
excessive calcification.

Operator panel and display

B

C

A

D

K

J

I

G

E

M F

Fig. 12

Item Designation

Function

A

ON/OFF button:

Switch on/off the circulator.

B

Rotating/pressing knob:

Set the temperature value.

Start/stop the heating function.

Navigation, selecting the settings in the menu.

C

Rotating/pressing knob:

Set the pump speed value.

Start/stop the pump function.

Set and confirm the menu options.

D

Adjustable safety circuit:

Adjust the safety temperature limit with delivered screwdriver.

E

Menu button:

Press it once: menu option is display.

Press it a second time: back to the working screen.

F

Key button:

Lock/unlock keys and knobs.

G

LED display:

Display the settings and actual values.

I

LED, heater:

Indicate the heating function is activated.

J

LED, temperature sensor:

Indicates that an external temperature sensor is connected.

K

LED, set:

The LED lights up at the same time as the set value is displayed.

M

LED, key button

Indicates that the function of keys and knobs is deactivated.

Advertising
This manual is related to the following products: