IKA HBC 10 baisc - Manual (Page 35)

35
Maintenance and cleaning
The device is maintenance-free. It is only subject to the
natural wear and tear of components and their statistical
failure rate.
Cleaning
For cleaning disconnect the mains
plug!
Use only cleaning agents which have been approved by
IKA
® to clean IKA ® devices.
Dirt Cleaning agent
Dye Isopropyl alcohol
Construction material Water containing tenside/
isopropyl alcohol
Cosmetics Water containing tenside/
isopropyl alcohol
Foodstuff Water containing tenside
Fuel Water containing tenside
For materials which are not listed, please request
information from IKA ® application support.
Wear protective gloves while cleaning the device.
Electrical devices may not be placed in the cleansing agent
for the purpose of cleaning.
Do not allow moisture to get into the device when cleaning.
Before using another than the recommended method for
cleaning or decontamination, the user must ascertain with
IKA
® that this method does not damage the device.
Spare parts order
When ordering spare parts, please give:
- machine type
- manufacturing number, see type plate
- item and designation of the spare part,
see www.ika.com, spare parts diagram and list
- Software version.
Repair
Please send the device for repair only after it has
been cleaned and is free from any materials which
may constitute a health hazard.
For repair, please request the “Decontamination Clear-
ance Certificate” from IKA ® , or download printout of it
from the IKA ® website www.ika.com.
If you require servicing, return the device in its original
packaging. Storage packaging is not sufficient. Please also
use suitable transport packaging.