Eppendorf Multiporator - Manual (Page 27)

69
Serial printers can be connected to the serial printer interface at the rear
of the device. It is also possible to read protocols for documentation
purposes via a PC terminal program. This requires a zero-modem cable
(9-pin socket / 9-pin socket, order no. 0013 610.525).
The following thermal printers are available from Eppendorf AG. The DIP
switch setting for an IBM-compatible printer is also described:
Order no.
Printer type Thermal printer DPU-414 0013 608.148
Accessories Power unit (230 V)
Power unit (115 V)
Thermal paper (10 rolls)
0013 608.172
0013 608.164
6547 001.018
Connecting
cable 9-pin socket / 9-pin plug
cable guide 1:1
(for Thermal printer DPU-414)
9-pin socket / 25-pin plug
zero-modem cable
(EDP compatible
e.g. for Matrix printer
Seikosha SP 2400 (endless paper)
0013 610.517
0013 610.533
18.Aug.97 15:59:08 eppendorf Multiporator 4308 V1.00
******** ERROR 07 ********
******** Short
τ
*********
4 Device description
Multiporator_Text_en.fm Seite 69 Freitag, 9. Juni 2006 8:05 08