Eppendorf Multiporator - Manual (Page 40)

82
Warranties and servicing are the responsibility of the distributor.
7.1 Disinfection
Before disinfecting the Multiporator

, disconnect the device from the main
power supply.
All parts of the Multiporator

, including the accessories and the
connecting cable, must undergo wipe disinfection.
The cuvette insert can also undergo spray disinfection.
However, it is not advisable to carry out spray disinfection on the entire
device, as disinfectant may enter the device.
7.2 Cleaning
Before cleaning the Multiporator

, disconnect the plug.
Ensure that no fluids enter the Multiporator

, as this could cause short-
circuits in the electrical installation as well as corrosion.
Wipe painted parts and aluminum surfaces using a cloth and mild
detergent and then wipe with a dry cloth.
Warning: Do not use any corrosive, solvent or abrasive detergents or
polishes.
7 Maintenance and servicing
Multiporator_Text_en.fm Seite 82 Freitag, 9. Juni 2006 8:05 08