JLG 450A_AJ Series II Operator Manual - Manual (Page 102)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6-22 – JLG Lift – 3121289
2. Swing Bearing/Worm Gear Teeth
Lube Point(s) - Grease Fitting
Capacity - A/R
Lube - Lubriplate 930-AAA
Interval - A/R
Lube Point(s) - Grease Fitting*
Capacity - A/R
Lube - Mobile SHC 007
Interval - A/R
DO NOT OVERGREASE BEARINGS. OVERGREASING BEARINGS WILL RESULT IN DAMAGE TO
OUTER SEAL IN HOUSING.
*If necessary install grease fitting into worm gear housing
and grease. Replace fitting with pipe plug when complete.