1 introduction, 2 operating specifications and performance data, Introduction -1 – JLG 450A_AJ Series II Operator Manual User Manual
Page 81: Operating specifications and performance data, Operating specifications -1
SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121289
– JLG Lift –
6-1
SECTION 6. GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
6.1
INTRODUCTION
This section of the manual provides additional necessary infor-
mation to the operator for proper operation and maintenance of
this machine.
The maintenance portion of this section is intended as informa-
tion to assist the machine operator to perform daily maintenance
tasks only, and does not replace the more thorough Preventive
Maintenance and Inspection Schedule included in the Service
and Maintenance Manual.
Other Publications Available:
450A/450AJ Service and Maintenance Manual....................3121290
450A/450AJ Illustrated Parts Manual ......................................3121291
6.2
OPERATING SPECIFICATIONS AND PERFORMANCE
DATA
Table 6-1. Operating Specifications
Unrestricted Rated Capacity
ANSI
CE & Australia
500 lb (227 kg)
500 lb (230 kg)
Maximum Travel Grade
(Gradeability)
with Boom retracted and approximately hori-
zontal. Tower Boom fully lowered (if
equipped).
2WD
4WD
30%
45%
Maximum Travel Grade (Sideslope) with
Boom retracted and approximately horizon-
tal. Tower Boom fully lowered (if equipped) -
ANSI Markets.
5°
Maximum Travel Grade (Sideslope) with
Boom retracted and approximately horizon-
tal. Tower Boom fully lowered (if equipped) -
CE & Australia Markets.
4°