JLG 450A_AJ Series II Operator Manual - Manual (Page 87)

SECTION 6 - GENERAL SPECIFICATIONS AND OPERATOR MAINTENANCE
3121289 – JLG Lift – 6-7
Hydraulic Oil
NOTE: Hydraulic oils must have anti-wear qualities at least to API Ser-
vice Classification GL-3, and sufficient chemical stability for
mobile hydraulic system service. JLG Industries recommends
Mobilfluid 424 hydraulic oil, which has an SAE viscosity index of
152.
NOTE: When temperatures remain consistently below 20 degrees F. (-7
degrees C.), JLG Industries recommends the use of Mobil DTE13.
Aside from JLG recommendations, it is not advisable to mix oils of differ-
ent brands or types, as they may not contain the same required addi-
tives or be of comparable viscosities. If use of hydraulic oil other than
Mobilfluid 424 is desired, contact JLG Industries for proper recommenda-
tions.
Table 6-12. Hydraulic Oil
Hydraulic System Operating
Temperature Range
S.A.E. Viscosity
Grade
+0° to + 180° F
(-18° to +83° C)
10W
+0° to + 210° F
(-18° to +99° C)
10W-20, 10W30
+50° to + 210° F
(+10° to +99° C
20W-20
Table 6-13. Mobilfluid 424 Specs
SAE Grade 10W30
Gravity, API 29.0
Density, Lb/Gal. 60°F 7.35
Pour Point, Max -46°F (-43°C)
Flash Point, Min. 442°F (228°C)
Viscosity
Brookfield, cP at -18°C 2700
at 40° C 55 cSt
at 100° C 9.3 cSt
Viscosity Index 152