Swinging the boom, Raising and lowering the tower boom, Raising and lowering the main boom – JLG 450A_AJ Series II Operator Manual User Manual

Page 64: Telescoping the main boom, 8 function speed control, Function speed control -10

Advertising
background image

SECTION 4 - MACHINE OPERATION

4-10

– JLG Lift –

3121289

TO AVOID SERIOUS INJURY, DO NOT OPERATE MACHINERY IF ANY CONTROL LEVER OR TOG-
GLE SWITCH CONTROLLING PLATFORM MOVEMENT DOES NOT RETURN TO THE ‘OFF’ OR
NEUTRAL POSITION WHEN RELEASED.

TO AVOID A COLLISION AND INJURY IF PLATFORM DOES NOT STOP WHEN A CONTROL
SWITCH OR LEVER IS RELEASED, REMOVE FOOT FROM FOOTSWITCH OR USE EMERGENCY
STOP SWITCH TO STOP THE MACHINE.

Swinging the Boom

To swing boom, use Main Lift/Swing controller to select RIGHT or
LEFT direction.

Raising and Lowering the Tower Boom

To raise or lower the Tower Boom, use Tower Boom Lift switch to
select UP or DOWN movement.

Raising and Lowering the Main Boom

To raise or lower the Main Boom, use Main Boom Lift switch to
select UP or DOWN movement.

Telescoping the Main Boom

To extend or retract the main boom, use the Main Telescope Con-
trol Switch to select IN or OUT movement.

4.8

FUNCTION SPEED CONTROL

This control affects the speed of all boom functions to the right of
the control and, also, Platform Level. When in the Counterclock-
wise maximum position, Drive and all boom functions are placed
in creep speed.

Advertising