JLG 450A_AJ Series II Operator Manual - Manual (Page 48)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3-12 – JLG Lift – 3121289
9. Telescope Control
This switch allows extension and retraction of
the main boom.
10. Lights (If Equipped)
This switch operates the chassis lights if the
machine is so equipped.
11. Jib Lift (if equipped)
Provides for raising or lowering of the jib by
positioning up/down.
12. Soft Touch Override Switch (If equipped)
This switch enables the functions that were cut out by the
Soft Touch system to operate again at creep speed, allowing
the operator to move the platform away from the obstacle
that caused the shutdown situation.
13. Soft Touch Indicator (If Equipped)
Indicates the Soft Touch bumper is against
an object. All controls are cut out until the
override button is pushed, at which time controls are active
in the Creep Mode.
14. Tower Boom Lift
Provides for raising and lowering of the tower
boom when positioned up or down.
15. Platform Rotate
Provides rotation of the platform when posi-
tioned to the right or left.