JLG 80SL Service Manual - Manual (Page 154)

SECTION 6 - GENERAL ELECTRICAL INFORMATION & SCHEMATICS
6-36 – JLG Lift – 3121325
NOTE: Position 1 = Termination point in the Main Terminal Box (There are 4 connections at each terminal position on X1.
These are designated as 1 = Top Top, 2 = Tob Bottom, 3 = Bottom Top, and 4 = Bottom Bottom. Refer to Figure 5-1.,
Main Terminal Box)
Position 2 = The position on the end item (if not specified in the table, it can be located on the electrical schematic).
S4 CSS 1009
S5 CSS 1003 (7x)
S6 CSS 1003
S7 CSS 1002
S8 CSS 1003 (2x)
S9 CSS 1005
S10 CSS 1007
E900066 C
Table 6-1. Main Terminal Box Wiring Description
Wire
Number
Type Position 1 Position 2 Label (External Harness)