JLG 80SL Service Manual - Manual (Page 51)

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3121325 – JLG Lift – 3-15
Engine Tray Slide
The engine tray can slide outward approximately 5.9 in.
(15 cm) when servicing components inside the engine
compartment.
1. Remove the two Capscrews (1) and Lockwashers
(2) on the front of the engine tray.
2. Loosen the two top Capscrews (3) at both ends of
the engine compartment. Slide engine tray outward.
3. Be sure to return engine tray to stowed position
when finished servicing. Secure engine tray with the
two front Capsrews (1) and Lockwashers (2) and
two top Capscrews (3).
3
1, 2
1, 2
3
1. Capscrew, M16 x 30mm
2. Lockwasher, M16
3. Capscrew, M16 x 60mm
Figure 3-12. Engine Tray Slide