JLG 80SL Service Manual - Manual (Page 60)

SECTION 3 - CHASSIS, PLATFORM & SCISSOR ARMS
3-24 – JLG Lift – 3121325
3.8 FUEL TANK
Removal:
NOTE: Drain Fuel Tank (1) before removing. Store diesel
fuel in approved receptacle.
1. Disconnect the Fuel Line Hoses (2, 5) from the fuel
tank by loosening the Clamps (3, 6). Pull hose from
Hose Fittings (4, 7).
2. Remove the Fuel Tank (1) by removing the four Nuts
(9) and Lockwashers (10) on the two fuel Tank
Straps (8).
Installation:
1. Place Fuel Tank onto the chassis. Secure tank with
Fuel Tank Strap. Fasten with Bolts and Lockwashers.
2. Secure Hose Fittings to Hoses with Clamps.
3. Refuel Tank with diesel fuel.
NOTE: Empty fuel tank weighs approximately 36.6 lbs
(16.6 kg).
1
2
3
5
6
7
8
9
10
9
10
4
1. Fuel Tank
2. Fuel Line Hose, 5.5 mm
3. Clamp
4. Hose Fitting
5. Fuel Line Hose, 7.5mm
6. Clamp
7. Hose Fitting
8. Fuel Tank Strap
9. Nut, M8
10. Lockwasher, M8
Figure 3-22. Fuel Tank Removal