Direction selector, Battery pack, Powerpack control console (optional equipment) – JLG LiftPOD FS80 (1001070451) User Manual
Page 42: Enable trigger, Battery release latch, Battery trickle charge plug, Emergency stop button, Speed trigger, Powerpack release latch, Powerpack control console (optional
SECTION 3 - MACHINE OPERATION
1001070451
LIFTPOD by JLG
1-877-254-3876
3-14
www.liftpod.com
1-877-2-LIFTPOD
7. Direction Selector
8. Battery Pack
Please follow the manufacturer’s instructions on safe operation
and maintenance of the cordless drill.
JLG recommends a cordless drill of at least 18V capacity.
Ensure cordless drill’s optional "Hammer" setting is disabled and
cordless drill is in "Drill" mode on medium to high torque. Do not
set to maximum torque setting.
USE ONLY CORDLESS DRILLS. DISCONTINUE USE OF THE CORDLESS
DRILL IF A FAULT IS DETECTED. ENSURE CORDLESS DRILL IS IN
"DRILL" MODE ON MEDUIM TO HIGH TORQUE SETTING, BUT NOT MAX-
IMUM TORQUE SETTING TO AVOID INJURY.
Powerpack Control Console (Optional Equipment)
1. Enable Trigger
2. Battery Release Latch
3. Battery Trickle Charge Plug
4. Emergency Stop Button
5. Direction Selector
6. Speed Trigger
7. Powerpack Release Latch
Figure 3-19. Powerpack control console
1
2
3
4
5
6
7
FS.book Page 14 Tuesday, May 10, 2011 3:15 PM