JLG LiftPOD FS80 (1001070451) - Manual (Page 12)

SECTION 1 - SAFETY PRECAUTIONS
1001070451 LIFTPOD by JLG 1-877-254-3876
1-2 www.liftpod.com 1-877-2-LIFTPOD
1.2 PRE-OPERATION
Operator Training and Knowledge
• Do not operate this machine until complete training is per-
formed by authorised persons.
• Only authorised and qualified personnel can operate the
machine.
• Read, understand, and obey all DANGERS, WARNINGS,
CAUTIONS, and operating instructions on the machine
and in this manual.
• Use the machine in a manner which is within the scope of
its intended application set by JLG.
• All operating personnel must be familiar with the emer-
gency controls and emergency operation of the machine
as specified in this manual.
• Read, understand, and obey all applicable employer,
local, and governmental regulations as they pertain to
operation of the machine.
Workplace Inspection
• The operator is to take safety measures to avoid all haz-
ards in the work area prior to machine operation.
• Do not operate or raise the platform while on trucks, trail-
ers, railway cars, floating vessels, scaffolds or other equip-
ment unless approved in writing by JLG.
• This machine can be operated in temperatures of 0°C to
40°C (32°F to 104°F). Consult JLG for operation outside
this range. Machine performance may vary from pub-
lished specification in very hot or cold conditions.
Machine Inspection
• Before machine operation, perform inspections and func-
tional checks. Refer to Section 2 of this manual for further
instructions.
• Do not operate this machine until it has been serviced and
maintained according to requirements specified in accor-
dance with this manual.
Figure 1-1. Read your manual
FS.book Page 2 Tuesday, May 10, 2011 3:15 PM