JLG LiftPOD FS80 (1001070451) - Manual (Page 28)

SECTION 2 - PREPARATION AND INSPECTION
1001070451 LIFTPOD by JLG 1-877-254-3876
2-10 www.liftpod.com 1-877-2-LIFTPOD
2.4 FUNCTION CHECK
Once the Walk-Around inspection is complete, perform a function
check of all systems in an area free of overhead and ground level
obstructions.
IF THE MACHINE DOES NOT OPERATE PROPERLY, TURN OFF THE
MACHINE IMMEDIATELY! REPORT THE PROBLEM TO THE PROPER
MAINTENANCE PERSONNEL. DO NOT OPERATE THE MACHINE UNTIL IT
IS DEEMED SAFE FOR OPERATION.
Function Check Items
1. Base Brake - Step on base to ensure the swivel castor
retracts properly.
2. Adjustable Feet - Check both rotate freely up and
down; check that rubber pads are installed and not
excessively worn.
3. Emergency Stop Button (optional powerpack) - ensure
all machine functions are disabled when the emergency
stop button is activated (pressed in) - then RESET the
emergency stop button by twisting it in the direction
indicated by the arrows.
TO AVOID COLLISION AND INJURY IF PLATFORM DOES NOT STOP
WHEN A CONTROL IS RELEASED, USE THE EMERGENCY STOP BUTTON
TO STOP THE MACHINE.
FS.book Page 10 Tuesday, May 10, 2011 3:15 PM