Platform caught overhead, Platform caught overhead -3, Releasing the drive interlock using the lanyard -3 – JLG LiftPOD FS80 (1001070451) User Manual

Page 53

Advertising
background image

SECTION 4 - EMERGENCY PROCEDURES

1-877-254-3876

LIFTPOD by JLG

1001070451

1-877-2-LIFTPOD

www.liftpod.com

4-3

NOTICE

IF THE OPTIONAL POWERPACK IS NOT INSTALLED, USE THE LANYARD
IN THE PLATFORM TO SECURE THE DRIVESHAFT IN A DEPRESSED
(PUSHED-IN) POSITION, RELEASING THE DRIVE INTERLOCK. WHEN
USING THE LANYARD, THE MANUAL DESCENT CRANK SHOULD BE
USED TO LOWER THE PLATFORM AS SHOWN IN FIGURE 4-2.

DO NOT ACTIVATE THE POWERPACK WHILE THE MANUAL DESCENT
CRANK IS ATTACHED.

Platform Caught Overhead

If the platform becomes jammed or snagged in overhead struc-
tures or equipment, rescue the platform occupant prior to freeing
the machine.

Rescue equipment can be used to remove the platform occupant.
Cranes and forklifts can be used to stabilize motion of the
machine.

Figure 4-3. Releasing the drive interlock using the

lanyard

FS.book Page 3 Tuesday, May 10, 2011 3:15 PM

Advertising
This manual is related to the following products: