JLG LiftPOD FS80 (1001070451) - Manual (Page 75)

SECTION 6 - SERVICE AND MAINTENANCE
1-877-254-3876 LIFTPOD by JLG 1001070451
1-877-2-LIFTPOD www.liftpod.com 6-5
Inspection and Maintenance Codes:
1. Check for proper and secure installation
2. No gouges, excessive wear, or dents showing
3. Visually inspect for excessive wear, damage, cracks, or
distortion
4. Check for cracked or broken welds
5. Check area is clean and free of debris
6. Check for proper adjustment
7. Check proper operation
8. Check returns to neutral or "off" position when released
9. Check for signs of leakage
10. Check for wear and/or proper routing
11. Check for proper tolerances
12. Check proper and authorized components installed
13. Verify
14. Perform
15. Replace
16. Inspect per Service and Maintenance Manual
Area on Machine Interval
Pre-Start Inspection Pre-Delivery or Frequent
Inspection Annual (Yearly) Inspec-
tion 5 Year Inspection
Prior to use each day; or
at each operator change Prior to each sale, lease
or delivery; in service for
3 months or more; or
purchased used Actually no later than 13
months from the date of
the prior inspection Addition item - When
rope worn or no more
than 5 years from first
use
Mast 1, 5, 1, 2, 5 1, 2, 3, 5
Mast Stump 3, 5 3, 4, 5 3, 4, 5
Rope 10, 16 10, 16 10, 16 15
Carriage 5 3, 5 1, 3, 4, 5, 7
Gearbox 3, 9 3, 9 1, 3, 9
FS.book Page 5 Tuesday, May 10, 2011 3:15 PM