JLG LiftPOD FS80 (1001070451) - Manual (Page 71)

SECTION 6 - SERVICE AND MAINTENANCE
1-877-254-3876 LIFTPOD by JLG 1001070451
1-877-2-LIFTPOD www.liftpod.com 6-1
SECTION 6. SERVICE AND MAINTENANCE
6.1 INTRODUCTION - MAINTENANCE SAFETY
PRECAUTIONS
General
This section contains the general safety precautions which must
be observed during maintenance of the aerial platform. It is
important that maintenance personnel pay strict attention to these
warnings and precautions to avoid possible injury to themselves
or others or damage to the equipment. A maintenance program
must be established by a competent person and must be followed
to ensure that the machine is safe to operate.
NOTICE
JLG MAY HAVE ISSUED SAFETY BULLETINS FOR YOUR JLG PRODUCT.
CONTACT JLG OR THE LOCAL AUTHORIZED JLG SERVICE CENTRE FOR
INFORMATION CONCERNING SAFETY RELATED BULLETINS WHICH MAY
HAVE BEEN ISSUED FOR YOUR JLG PRODUCT. ALL ITEMS REQUIRED
BY THE SAFETY RELATED BULLETINS MUST BE COMPLETED ON THE
AFFECTED JLG PRODUCT.
Due to continuous product improvement, JLG reserves the right to
make specification changes without prior notification. Contact JLG
for updated information.
MODIFICATION OF THE MACHINE WITHOUT CERTIFICATION BY A
RESPONSIBLE AUTHORITY THAT THE MACHINE IS AT LEAST AS SAFE
AS ORIGINALLY MANUFACTURED IS AN OHSA SAFETY VIOLATION.
Your safety, and that of others, is the first consideration when
engaging in the maintenance of equipment. Always be conscious
of moving parts and pinch points. Do not allow heavy objects to
rest in an unstable position. When raising a portion of the equip-
ment, ensure that adequate support is provided.
SINCE THE MACHINE MANUFACTURER HAS NO DIRECT CONTROL OVER
THE FIELD INSPECTION AND MAINTENANCE, SAFETY IN THESE AREAS
IS THE RESPONSIBILITY OF THE OWNER/OPERATOR.
FS.book Page 1 Tuesday, May 10, 2011 3:15 PM