JLG E45A_AJ ANSI Service Manual - Manual (Page 13)

SECTION 1 - SPECIFICATIONS
3120765 – JLG Lift – 1-5
1.12 SERIAL NUMBER LOCATIONS
For machine identification, a serial number plate is affixed
to the left rear of frame, in front of left rear wheel. If the
serial number plate is damaged or missing, the machine
serial number is stamped on the top left side of the frame
and the top left side of the turntable. In addition, the serial
number is stamped on top of the end of the upper boom,
mid boom, and lower boom at the left rear of the booms.
Figure 1-1. Serial Number Locations