JLG M600 Operator Manual - Manual (Page 43)

SECTION 3 - MACHINE CONTROLS AND INDICATORS
3121217 – JLG Lift – 3-11
Platform Control Indicator Panel
(See Figure 3-3., Platform Control Indicator Panel)
NOTE: The platform control indicator panel uses different shaped
symbols to alert the operator to different types of opera-
tional situations that could arise. The meaning of those
symbols are explained below.
Indicates a potentially hazardous situation, which
if not corrected, could result in serious injury or
death. This indicator will be red.
Indicates an abnormal operating condition,
which if not corrected, may result in machine
interruption or damage. This indicator will be yel-
low.
Indicates important information regarding the
operating condition, i.e. procedures essential for
safe operation. This indicator will be green with
the exception of the capacity indicator which will
be green or yellow depending upon platform
position.
1. Tilt Alarm Warning
2. Overload indicator
3. System Distress
4. Posi Track 5. Footswitch/Enable Indicator
6. Low Battery Indicator
7. Creep Indicator
8-11. Not Used
Figure 3-3. Platform Control Indicator Panel