Section 1. specifications, 1 capacities, 2 operating specifications – JLG M600 Service Manual User Manual

Page 15: 3 generator, 4 battery charger, 5 drive/steer system, 6 tires, Section 1 - specifications, Capacities -1, Operating specifications -1

Advertising
background image

SECTION 1 - SPECIFICATIONS

3121813

– JLG Lift –

1-1

SECTION 1. SPECIFICATIONS

1.1 CAPACITIES

1.2 OPERATING SPECIFICATIONS

1.3 GENERATOR

1.4 BATTERY CHARGER

1.5 DRIVE/STEER SYSTEM

1.6 TIRES

Table 1-1. Capacities

Generator Fuel Tank

(M Models Only)

13 gallons (49.2 liters)

Hydraulic Tank
Prior to S/N 51941
S/N 51941 to Present

15 gallons (57 liters)

15.9 gal.(60.2 L)

12.4 gal. (46.9 L) to full mark

Drive Hub

0.4 gal. (1.5 liters)

Table 1-2. Operating Specifications

Maximum Work Load (Capacity)
Unrestricted:

500 lb (230 kg)

Maximum Travel Grade (Gradeability)
with Boom retracted and approximately
horizontal. Tower Boom fully lowered.

30%

Maximum Travel Grade (Side Slope) with
Boom retracted and approximately hori-
zontal. Tower Boom fully lowered.

Tilt Alarm Setting (See Section 3)
ANSI, CSA
CE E/M600 & E/M600J
CE E/M 600JP



Maximum Vertical Platform Height:

60 ft. (18.29 m)

Maximum Horizontal Platform Reach
E600
E600J

43 ft. (13.11 m)

42 ft. 9 in. (13.11 m)

Machine Width
2WD
4WD

7 ft. 11 7/16 in. (2.42 m)

7 ft. 11 3/8 in. (2.42 m)

Machine Length
E/M600
E/M600J
E/M600JP

30 ft. 11 5/16 in. (9.43 m)
30 ft. 8 15/16 in. (9.37 m)

33 ft. 3 3/4 in. (10.15 m)

Turning Radius (outside)

15 ft. 3 in. (4.65 m)

Turning Radius (inside)

4 ft. (1.23 m)

Maximum Tire Load:

7700 lbs. (3500 kg)

Maximum Ground Bearing Pressure
E600J/M600J

E600JP/M600JP

52 psi (3.7 kg/cm

2)

51 psi (3.6 kg/cm

2)

Maximum Drive Speed:

3.0 mph (1.3 m/s)

Electrical System Voltage

48 volts

Maximum Hydraulic System Pressure

3200 psi (221 Bar)

Maximum Wind Speed

28 mph (12.5 m/s)

Maximum Manual Force

400N

Gross Machine Weight (Platform Empty)
E600J/M600J

E600JP/M600JP

16,300 lb. (7,393 kg)
16,800 lb. (7,620 kg)

Table 1-3. Generator

Alternator Output

58 volts @ 45 Amps

RPM’s under max. load

3100

Start Battery

12 volts

Engine Oil

10W30 (Refer to Engine Manual)

Dynamo

12 volt, 15 amp DC

Dynamo Output Fuse

20 amps DC

Control Fuse

15 amps DC

Table 1-4. Battery Charger

AC Input

120V - 240V Auto Seeking

AC Draw

17 amps at start of charging

DC Output

48 volts, 23 amps

Table 1-5. Drive System

Drive Motor

48 VDC, 12.5 H.P. @ 3200 rpm. con-

tinuous, rotation - reversible

Drive Brake

spring-applied, hydraulically released

Table 1-6. Tires

Size

Type

Pressure

36/14 LL-22.5

pneumatic

55 psi (4.0 Bar)

36/14 LL-22.5

foam filled

N/A

Table 1-2. Operating Specifications

Advertising
This manual is related to the following products: