JLG M600 Service Manual - Manual (Page 179)

SECTION 6 - JLG CONTROL SYSTEM
3121813 – JLG Lift – 6-13
7
PLATFORM
ALARM
0
1
Sounds continuously when above elevation and tilted only.
Sounds continuously when above elevation and tilted, and in conjunction with
fault code flashes (Option)
0
8
SOFT TOUCH
0
1
0=No Soft Touch system installed
1= Soft Touch system installed (Option)
0
9
LOAD CELL
0
1
2
No Load Cell Installed
Warn Only
Warn & Cutout
0
NOTE: The following information is to be used when working with the MACHINE SETUP menu. When configuring the
machine, the machine configuration must be completed before any personality settings can be changed. Changing
the personality settings first and then changing the model number of the machine configuration will cause the per-
sonality settings to return to default values.
Default settings will be shown in bold type.
4150342-3
Table 6-3. Machine Configuration Programming Information
Configuration Digit Number Description
Default
Number