9 torque requirements, 10 major component weights, 11 serial number location – JLG M600 Service Manual User Manual
Page 17: Torque requirements -3, Major component weights -3, Serial number location -3, Component weights -3
SECTION 1 - SPECIFICATIONS
3121813
– JLG Lift –
1-3
1.9 TORQUE REQUIREMENTS
1.10 MAJOR COMPONENT WEIGHTS
1.11 SERIAL NUMBER LOCATION
A serial number plate is affixed to the right side of the
frame. If the serial number plate is damaged or missing,
the machine serial number is stamped on the left side of
the frame at the top.
Table 1-9. Torque Requirements
Description
Torque Value (Dry)
Interval Hours
Wheel Lugs
170 ft. lbs.(238 Nm)
150
T/T Counterweight
Bolts
400 ft.lbs.(560 Nm)
A/R
Swing Bearing Bolts
190 ft.lbs.(260 Nm)
50/600*
*Check swing bearing bolts for security after first 50 hours of opera-
tion and every 600 hours thereafter. (See Swing Bearing in Section 3.)
NOTE: When maintenance becomes necessary or a fas-
tener has loosened, refer to the Torque Chart to
determine proper torque value.
Table 1-10. Component Weights
Component
Pounds
Kilograms
Frame (bare)
1381
626
T/T (bare)
2093
950
Boom Assembly (E/M 600)
4464
2025
Boom Assembly (E/M 600J)
4464
2025
Tire & Wheel
226
102.5
Swing Drive
70
32
Swing Bearing
100
45.4
Platform Console
25
11
Side Entry Platform - 30x72 (bare)
175
80
Side Entry Platform - 30x48 (bare)
144
66
Counterweight
2560
1161
Foam Fill (Filled Tires)
441
200
Figure 1-1. Serial Number Location
SERIAL NUMBER
PLATE
SERIAL NUMBER
STAMPED ON FRAME