2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 - Manual (Page 19)

Mounting 2.3
19
2.3 Mounting
External Antenna Connection
Screw the antenna enclosed into the SMA antenna connector.
Caution
„ Tighten the antenna connector gently with your hand – never use
wrenches!
Note
„ The antenna enclosed has a sufficient gain for trouble-free operation in
normal conditions. If the UMTS signal is poor or you want to place your
antenna separately from EasyGate , you can use an antenna with an SMA-
connector terminated cable. The antenna should be mounted vertically.
„ The Antenna shall be located within the same building as the main equipment.
„ For antenna and cable parameters see the “Technical Parameters”.
SIM Card Installation
Open the SIM card holder on EasyGate ’s backside, insert the SIM card and close it.
Cautions
„ Make sure that the GSM provider’s SIM card is compatible with the GSM
network supported by your EasyGate version.
„ Select the required UMTS provider and SIM card services, such as call
forwarding, call barring, preferred networks, SMS service centre, etc. in
your mobile phone before inserting your SIM card in EasyGate .
Figure 2.3
SIM Card
Installation