2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 - Manual (Page 20)

Mounting 2.3
20
Wall mounting
2N ® EasyGate is equipped with two hangings on the back side for wall mounting. For
drilling holes to the wall could be used drill pattern in QuickStart.
Power Supply Connection
2N ® EasyGate is fed with 10-16V DC. Where a source other than the included power
supply adapter is used, the voltage range and polarity shown on the EasyGate power
supply connector have to be maintained.
Warning
„ Do not activate the power supply until the antenna is connected to
2N
® EasyGate to avoid the GSM module damage.
Figure 2.4
Zavěšení
2N ® EasyGate
na zeď