2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 - Manual (Page 39)

Table of Parameters 3.2
39
Minimal credit Function No.: -
Set minimal credit value to send warning SMS "LOW CREDIT". If credit is lower
then given value, warning SMS is send after every credit check, until you recharge
your SIM card.
Setting options: 0-999
Step: 1
Default setting:
0
Credit value position in received SMS Function No.: -
If there are more numbers except credit value in text answer (e.g. date, time and
so on) EasyGate seeks the number corresponding with credit value from given
position in text. The seek algorithm skips every non-number character. If credit
value is the first number in text you can leave setting 0. If there are other
numbers before credit value, set parameter to text position, from which the
algorithm will seek.
Setting options: 0-180
Step: 1
Default setting: 0
Telephone number for service SMS Function No.: -
Telephone number for service SMS. The number is common for GGMC SMS and
"LOW CREDIT" SMS on prepaid SIM cards.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
Service Parameters
Hardware version Function No.: -
EasyGate hardware version - for information only (cannot be modified). Must be
used for communication with the manufacturer.
Firmware version Function No.: -
EasyGate firmware version - EasyGate central processor program version. The
manufacturer can issue upgrades to extend functions. To load new firmware into
EasyGate use the Upgrade function. Keep communicating with the manufacturer.
Serial number Function No.: -
EasyGate serial number - for information only (cannot be changed). Must be used
for communication with the manufacturer.
GSM operator lock Function No.: -
Refer to GSM & SIM Parameters.