Security parameters, Table of parameters 3.2 – 2N Analogue GSM gateway 2N EasyGate - Manual, 1575 v1.1.0.2 User Manual
Page 41
Table of Parameters
3.2
41
Global
initialization
Function
No.:
99
Initialization of all EasyGate parameters including the PIN and service password.
Security Parameters
PIN - value
Function No.: 40
Fill in the PIN value for automatic PIN entering upon EasyGate power up. It is
applied only if the SIM card is PIN secured. If the given PIN fails to match the
SIM, it is deleted automatically. If entered via a telephone line upon EasyGate
start, the PIN is stored automatically.
Setting options:
0, 4-8 characters (0-9)
Upon full initialization: blank
Service
password
Function
No.:
90
Fill the service password for programming via a telephone line. Some parameters
can be programmed by DTMF dialing and so the access to programming must be
password-protected.
Setting options:
4-8 characters (0-9)
Upon full initialization:
12345