2N Helios IP User manual, 1510 v1.12 - Manual (Page 102)

Configuration 3.3
102
User Sounds
This menu helps create customised signalling of 2N ® Helios IP states by replacing the
default tone signalling with user sound files.
User Sound Upload
Used for handling user sound files within 2N ® Helios IP. Push the Browse button to
select a sound file and then push to upload the file into 2N ® Helios IP. The user
sound format is an 8bit or 16bit .WAV file with 8kHz sampling frequency. Push to
remove the file uploaded. Push to play and verify the recorded sound on your PC.
Figure 3.46 User sounds
The following user sounds can be used: