2N Helios IP User manual, 1510 v1.12 - Manual (Page 63)

Configuration 3.3
63
Profile active only (user independent)
A telephone directory number is called only if the profile is active.
Example of use: you want to call the reception desk during working hours.
Profile & user active
A telephone directory number is called only if the profile and the user are active.
Example of use: you want to call the secretary‘s office during working hours and
the secretary‘s presence.
Profile active & user inactive
A telephone directory number is called only if the profile is active and the user is
inactive.
Example of use: you want to call the reception desk during working hours when
the secretary is absent.
Profile or user active
A telephone directory number is called if the profile or the user is active.
Example of use: you want to call the stock release department during working
hours or when the personnel are present.
Profile active or user inactive
A telephone directory number is called if the profile is active or the user is
inactive.
Example of use: you want to call a technician’s cellular phone during lunch time or
the technician’s absence.
Locks
This menu helps you set the opening codes and modes for locks 1 to 4 attached to
2N
® Helios IP (for Part Nos. 9137131(CK)E, 9137161(CK)E and 9137111(CK), locks 3