2N Helios IP User manual, 1510 v1.12 - Manual (Page 62)

Configuration 3.3
62
General Settings
Profile name
Enter the scheduler profile name. This parameter is optional and helps you search
the list of profiles more easily.
Profile Time Schedule
Set the presence of a user in a week period. A profile is active if the current time
matches the set parameters. To use this function properly, make sure that the current
time data have been set properly on the device (see the Date and Time subsection).
Profile Activation and Deactivation
Set the manual user activation and deactivation codes. To activate or deactivate a
profile, use the DTMF code from the user telephone or the 2N
® Helios IP numeric
keypad. If just one code is set, or both the codes are the same, the current user
status will be switched over after code entering. You can verify the selected status by
a sound signalling. If no code is set, the function is inactive and the profile status
depends on the time schedule.
User Active if…
Set at what user and profile status the telephone directory numbers will be called. The
settings are applicable only if the time schedule is set for the given telephone number
in the directory. See the Telephone Directory subsection (for Part Nos. 9137131(CK)E,
9137161(CK)E and 9137111(CK)E this function is supported with a licence key only,
Part No. 9137901.)