2N Omega series - VoIP manual v1.4 User Manual
Page 65
Advertising
65
Push
to set the conditions.
Outgoing ME enabled – tick off to enable a ME outgoing call.
Incoming ME enabled – tick off to enable ME in an incoming call.
Allow sending SMS – tick off to enable sending SMS on missed calls (via the first
GSM port).
SMS at no answer text (%n for number) – type the SMS text to be sent after a
missed call. %n stands for the calling number.
ME SIP route – enter the IP address including the port on the device that “controls” the
ME function. As a rule, the own Ethernet module IP address is used.
ME DISA line – select the DISA line to be used for ME.
Push
for confirmation.
Advertising