2N Omega series - VoIP manual v1.4 - Manual (Page 69)

69
This format of Add LCR n
ormalization menu is set by parameter “Advanced config
of regular expressions” (see 4.4.1).

Line – select the incoming line to which normalising shall apply.

Regular expression – set a normalising condition to match to incoming calls with an
empty called number (no called number was passed to the Ethernet module). The
correct syntax of the regular expression is ^$ in this case.

Rule – enter which number shall be “dialled” after the condition is met. In LCR this
called number will be routed to DISA.

Type – define the call type for the condition. Select Called incoming.

Description - an optional brief description.
Push for confirmation.
If the call is recognized as an incoming ME call, the empty called number is
automatically replaced with string #mobext#. No normalising rule is needed.