2N Omega series - VoIP manual v1.4 User Manual
Page 96
Advertising
96
6.1.2. Communication Setting
If you run the 2N
®
XAPI Server Console for the first time, set its
communication with the running 2N
®
XAPI server.
To set communication, use the Set/Communication menu.
Enter the following:
IP address
– IP address of the running 2N
®
XAPI server (Ethernet module in
this case).
Host
– name of the running 2N XAPI server PC (LocalHost), entered instead of
the IP address.
Port
– 2N
®
XAPI server communication port. The default value is 6800 and
there is no need to change it.
Service
– registered service number – to be entered instead of the port.
Push OK for confirmation.
Advertising