2N Omega series - VoIP manual v1.4 User Manual
Page 71
Advertising
71
Destination name – name of the destination to be displayed.
Prefix 1 – enter the prefix for the calls that do not meet the ME condition i.e. the calling
number does not match any of the incoming ME numbers set for the users. It should
correspond to the number set in the “Rule” parameter (see 4.12.4.2)
Prefix 2 - enter the prefix for the calls that meet the incoming ME condition. The
correct syntax is #mobext#.
Description - an optional brief description.
Route name – select the earlier created route for the ME function.
Line selection – select the line type (Default).
Description - an optional brief description.
Push
for confirmation.
Advertising