2N Omega series - VoIP manual v1.4 - Manual (Page 7)

7
2. Ethernet Module
The Ethernet module is designed exclusively for the 2N
®
OMEGA Lite PBXs
to provide remote control, connection of external applications (PBX Assistant, SMS
server) and LAN and Internet voice services.
The Ethernet module is installed to the left of the power supply unit, above the
main board. To connect the module, use two connecting cables (insert them on the
J15/J26 main board connectors) and two spacers (all are included in the delivery).
Fit the Ethernet module to the spacers using the two M3 screws included.
Remove the two J8/J9 jumpers on the PBX main board to make the system
work properly.
Use the USB cable and HyperTerminal for the initial settings of the IP address
and network mask, and the available web configuration for further settings.
To connect the system into the 10/100BASE-T (Twisted Pair Ethernet)
computer network, use a standard straight cable terminated with RJ 45 connectors.
See the Ethernet Module User Manual on the enclosed CD for detailed
installation information.