Table of programmable parameters 3.2, Routing – 2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 User Manual

Page 55

Advertising
background image

Table of Programmable Parameters

3.2

55

Key

The WiFi security key consists of a sequence of alphanumeric characters or

hexadecimal symbols (as defined in the Key format).

Setting options:

For WEP key:

Enter 5, 13 or 16 alphanumeric characters, or 10, 26 or

32 hexadecimal symbols.

For WPA/WPA2 key:

Enter 8 to 63 alphanumeric characters, or 64

hexadecimal symbols.

Routing

Set the back-up connection switch parameters in this menu. You will need back-

up connection when your main provider is unable to provide full connectivity.

When the main connection fails, the gateway cannot establish the main server

connection and switches to the back-up system. Set the Error rate parameter to

define the count of error responses and the switching time. The main route is

restored when the first correct response comes from the ICMP server.

Advertising