Table of programmable parameters 3.2, Time – 2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 User Manual
Page 76
Table of Programmable Parameters
3.2
76
Automatic reboot
Enable/disable the automatic gateway restart after firmware downloading.
Tip
n
You can perform remote restart of the router using the Update button
with the Automatic restart option.
Time
Remember to set the SNTP server to make the system time work properly. If the
SNTP server is unavailable, system time is obtained from the wireless network,
this service is not supported in some networks.
Time zone
Set the time zone according to the UTC standard and/or a shift with respect to
GMT 0.
Daylight saving
Set whether the daylight saving (summer) time should be respected in the system
time and specify the count of hours for the shift.
Used – displayed in the daylight saving time mode.
Setting options:
OFF
+1 hour
+2 hours
Daylight start
Set a month, week and day in the week for daylight saving time activation to
optimise its use.
Default setting:
March, Last week, Sunday
Daylight end
Set a month, week and day in the week for daylight saving time deactivation to
optimise its use.
Default setting:
October, Last week, Sunday
Current local time
Current gateway system time depending on the SNTP, time zone and daylight
saving time settings.