2N 4G wireless router 2N SpeedRoute - User manual, 1898 v1.02 - Manual (Page 73)

Table of Programmable Parameters 3.2
73
Identifier
The same as in the VPN menu. A matching key is then assigned to the identifier.
Enter any ASCII characters to form a word, IP address, e-mail address, or a
sequence of random characters.
Pre-shared key
Use this parameter to define the security key for packet encryption between the
IPsec tunnel parties.
HTTP
This menu changes initial port of the web interface. You can set different port,
than the default web port 80. After the change you have to to fill the port number
behind the IP address to connect to the configuration interface. This parameter is
useful, when more devices share the same IP address.
SETUP Menu > System
Brand
Brand setting allows to the customer to set some parts of the configuration web
interface design.
Target Image
Parameter to select, which one of selectable items will be loaded or removed.
Setting options: Logo – selects the company logo in the top left corner
of configuration interface
Login Logo – selects logo shown on the login screen
Hotspot background – selects the background for
login screen of HotSpot
Default setting: Logo
Erase
Removing the selectable item set in Target Image by default value.
File to import
The location of file with the image, which should be loaded from your PC.
Note
n The size limit of the image is 450 kB. Supported formats: jpg, png, gif.